Edgecam Waveform roughing and 5-axis milling - Mikron HMP600 U Info Icon
Maximum material removal with Waveform roughing and 5-axis milling on an Agie Charmilles Mikron HMP600 U, using a SECO 12mm Vari Mill and a 16mm x R3.1 bullnose cutter
 

Edgecam Waveform roughing and 5-axis milling - Mikron HMP600 U

Edgecam Waveform roughing and 5-axis milling - Mikron HMP600 U

Maximum material removal with Waveform roughing and 5-axis milling on an Agie Charmilles Mikron HMP600 U, using a SECO 12mm Vari Mill and a 16mm x R3.1 bullnose cutter

 
Waveform machining on a Mori Seiki VMC SVD 503

Waveform machining on a Mori Seiki VMC SVD 503

Waveform machining from Edgecam at SECO - Material : Steel 709M40T HB 248/302, 12mm diameter chip splitter, Speed : 7959 RPM, Feed : 6750 mm/min, Cycle time : 2.75 minutes, Depth 20mm, Stepover 20%

 
Edgecam Waveform at SGS

Edgecam Waveform at SGS

DMU 75 Monobloc, Material - Steel 01 Grade, Tool Diameter - 12mm Vcarb, Ap 20mm Ae 2mm, Speed - 5500 RPM, Feed 8000 mm/min, Cycle time : 3.01 minutes

 
Decrease Cutting Time - Waveform Cutting at Sandvik

Decrease Cutting Time - Waveform Cutting at Sandvik

Waveform roughing is a high speed machining strategy that maintains a constant tool cutting load by ensuring the tool engagement into the material is consistent. The tool path moves in a smooth path to avoid sharp changes in direction which maintains the machine tool's velocity.

 
Edgecam Waveform - Mazak Integrex i200 using Sandvik tooling

Edgecam Waveform - Mazak Integrex i200 using Sandvik tooling

A new short video showing Edgecam Waveform in action on the Mazak Integrex i200

 
Edgecam Waveform - Cutting P20 Using Ingersoll Tooling

Edgecam Waveform - Cutting P20 Using Ingersoll Tooling

A new short video showing Edgecam Waveform steering the tool through P20 almost as quickly as cutting air. Shorter, intelligent roughing will ensure your machine and tool are working hard for your business.

 
Edgecam Waveform - P20 Steel with Sandvik Coromill on Mazak VCN 410

Edgecam Waveform - P20 Steel with Sandvik Coromill on Mazak VCN 410

In this video you can see Edgecam using Waveform roughing to fly through the roughing cycle. A job machined in the traditional fashion would take 2hrs 40mins - with Edgecam - it takes just 5 mins!

 
Edgecam waveform roughing and profile finishing

Edgecam waveform roughing and profile finishing

Widenhorn Industriële Automatisering (WIA) in cooperation with Van Hoorn Carbide.

Waveform roughing strategy is a high speed machining technique that maintains a constant tool cutting load by ensuring the tool engagement into the material is consistent. The tool path moves in a smooth path to avoid sharp changes in direction which maintains the machine tool's velocity.

 
Edgecam Waveform Roughing Aluminium

Edgecam Waveform Roughing Aluminium

Widenhorn Industriële Automatisering (WIA) in cooperation with Van Hoorn Carbide.

Waveform roughing strategy is a high speed machining technique that maintains a constant tool cutting load by ensuring the tool engagement into the material is consistent. The tool path moves in a smooth path to avoid sharp changes in direction which maintains the machine tool's velocity.

 
Edgecam Waveform Roughing RVS304

Edgecam Waveform Roughing RVS304

Widenhorn Industriële Automatisering (WIA) in cooperation with Van Hoorn Carbide.

Waveform roughing strategy is a high speed machining technique that maintains a constant tool cutting load by ensuring the tool engagement into the material is consistent. The tool path moves in a smooth path to avoid sharp changes in direction which maintains the machine tool's velocity.

 
Alfatool & Edgetech add industry knowledge to Waveform machining

Alfatool & Edgetech add industry knowledge to Waveform machining

Alfatool (a SECO tools company) is working in Sweden, Norway and Denmark. In collaboration with Edgetech, they have incorporated their expert cutting knowledge into the Waveform cycle from Edgecam.

 
UniMek Waveform machining

UniMek Waveform machining

Waveform machining delivering material removal rates beyond the limits of the machine and cutting tool Material ST52 Steel, machined in Mazak I200 with tools from SECO / Walter provided by Digernes

 
Waveform machining with Edgecam, Hurco and Iscar

Waveform machining with Edgecam, Hurco and Iscar

Waveform machining with Edgecam, Hurco and Iscar. Material : Steel EN8, Tool : 12mm Diameter Chatterfree, Speed : 8000 RPM, Feed : 4000 mm/min, AP : 20mm, AE : 1mm

 
Edgecam Waveform Roughing with WD Hearn Machine Tools and ISCAR tooling

Edgecam Waveform Roughing with WD Hearn Machine Tools and ISCAR tooling

Edgecam Waveform Roughing with WD Hearn Machine Tools and ISCAR tooling. Material : EN8 Steel, Tool : 10mm Chatterfree, Ap : 20mm, Ae : 1mm, Speed : 8000 rpm, Feed : 4000 mmpm

 
Edgecam Waveform - SMTCL Grand Opening

Edgecam Waveform - SMTCL Grand Opening

Edgecam's Waveform machining in collaboration with SMTCL-Americas and Iscar tooling. Material: 4140, Tool: .500 5FL EM, Speed: 10,000, Feed: 200ipm, DoC: 1.00", Stepover: .075

 
Edgecam Waveform at Sandvik Coromant UK Open House

Edgecam Waveform at Sandvik Coromant UK Open House

Component machined on a Mori Seiki SV 503 using Edgecam Waveform Milling for the Sandvik Coromant UK open house event on the 3rd of July 2014.

http://www.edgecam.com